company-news

COMPANY NEWS

 

VELOX France is offering you THE new generation of cleaning products, replacing dangerous chemical solvants without altering cleaning performance.
VELOX, your European partner in the distribution of raw and specialty materials for the plastics and composites industries, are delighted to expand their vast product portfolio thanks to a range of cleaning solvants.
Our products are based on sustainable raw materials. We are focusing on new solutions for the future.

ADVANTAGES:

  • Significant reduction of VOC in the workshop
  • Reduced risk of fire
  • Protects employee health
  • Recyclable by decanting and distilling
  • No CLP pictograms
  • No risk phrase
  • Fully compliant with current and future regulations
  • Products are used and manufactured in Scandinavia
  • Products are 100% biodegradable

APPLICATIONS:

  • Industries using polyester, epoxy or PU resins
  • Cleaning small tools, gelcoat machines and spray machines
  • Cleaning automated production lines (manufacturing of SMC, panels, production of PU foam, RIM applications, etc.)
  • Cleaning dirty moulds
  • Remplacing dangerous chemical solvants

OBJECTIVES:

  • Eco-responsability
  • Reduce the risk of occupational illness and fire in the workshop
  • Create a healthy environment


For further information, please contact:
Pascal Dubois
dubois(at)velox.com

VELOX GmbH (“VELOX”), a leading distributor of raw material specialities for the plastics, composites, rubber and coatings industries announces a successful product launch of Trinseo plastic material for medical devices application in Poland.

Trinseo plastic can now be found in an innovative mobile fetal monitoring device developed by Mo Fe Ma, a start-up medical devices company headquartered in Poland. Mo Fe Ma was formed in cooperation with Techprotekt, another Poland-based medical devices company, and Malopolska Agencja Rozwuju Regionalnego SA. for the purpose of introducing the device – ZuzaMED – to expectant mothers in the Polish marketplace.

ZuzaMED is a small, portable device that rests on the maternal body and monitors the health condition of the fetus as it develops. It is worn across the belly and can be used without any restriction to length of time.

The monitor’s housing is made of Trinseo’s ignition resistant EMERGE™ PC/ABS 7700 Advanced Resins. The material is widely used and accepted in the medical device industry and meets the technical requirements of the application: These requirements include biocompatibility for extended skin contact, low density for light weighting, and UL 94 flame retardancy to provide for the user’s safety. The material also needed to be durable to withstand movement and jarring, resist dirt and grime, and be able to be cleaned with a 40% alcohol solution.

VELOX, a distributor of Trinseo medical resins in Europe with a speciality in medical polymers, successfully positioned the material. The company had been working with Mo Fe Ma since 2014 on the application, providing sample stock for assessment and evaluation and offering regulatory and biocompatibility guidance and documentation. ZuzaMED was commercialised in 2016 after a careful product development process.

François Minec, General Manager at VELOX comments: “The material met all the requirements of the highly regulated medical devices industry and it provided the technical requirements needed for the application. Trinseo’s material was unique in that the ABS component benefited from Trinseo’s proprietary mass polymerisation technology (vs an emulsion process) which results in exceptionally white base resin for colouring the ZuzaMED device.

This is the first product offered by Mo Fe Ma. It is considered by Poland officials to be of major importance for soon-to-be moms and their children. The device can be purchased at www.zuzamed.pl

The ZUZAMED device is CE 2274 approved by TUV Nord Polska Sp. z o.o., fulfilling both EN DIN 13485:2012 and 9342/EEC-MDD requirements. With these approvals in place, Mo Fe Ma is now focused to expand its reach beyond the domestic Polish market.

About VELOX GmbH
VELOX GmbH is a European leader in the marketing and distribution of raw material specialities for the plastics, composites, rubber and coatings industries. Founded in 1993 by Bernard Goursaud and N. Max Schlenzig, VELOX is headquartered in Hamburg, Germany. The company has 21 offices throughout Europe and employs over 200 experienced employees to support its customers. For more information visit www.velox.com.

Trinseo selected VELOX as a medical distribution partner in 2013 because of its specific expertise in the medical marketplace as well as its capacity to support projects of all scale including start-up projects such as Mo Fe Ma. VELOX has access to sample stock of Trinseo’s medical grades which allows for delivery of small quantities (MOQ 25 kg) and offers a deep understanding of the highly regulated medical market.

About Trinseo
Trinseo (NYSE:TSE) is a global materials solutions provider and manufacturer of plastics, latex binders, and synthetic rubber. We are focused on delivering innovative and sustainable solutions to help our customers create products that touch lives every day — products that are intrinsic to how we live our lives — across a wide range of end-markets, including automotive, consumer electronics, appliances, medical devices, lighting, electrical, carpet, paper and board, building and construction, and tires. Trinseo had approximately $3.7 billion in net sales in 2016, with 15 manufacturing sites around the world, and nearly 2,200 employees. For more information visit www.trinseo.com.

Click here to download the PDF

VELOX GmbH (“VELOX”), a leading distributor of raw material specialities for the plastics, composites, rubber, paints and coatings industries, presents its extensive medical polymers portfolio at MEDTEC Europe in Stuttgart, Germany. VELOX will be located at Booth No. G16 in Hall 1 during this specialised European event for medical component and service providers.

VELOX’ expert sales team is delighted to offer its medical range of thermoplastic polymer specialities which can be used in a wide variety of medical applications together with its co-exhibiting partners Arkema, Lubrizol Advanced Materials, Repsol, Topas Advanced Polymers and Trinseo.

For the first time VELOX presents Repsol’s medical polyolefins PP, PE and EVA under the new brand Repsol Healthcare® as well as  3D printing materials specific for medical applications from ADVANC 3D Materials.

With over 20 years of technical and commercial expertise VELOX is best-placed to understand requirements for medical packaging, non-implantable and implantable medical devices, dental materials, orthopaedics, pharmaceutical packaging, drug delivery systems, diagnostics and surgical equipment. If requested, VELOX’ dedicated medical team is able to provide solutions for customised compounds through its ISO 13485 certified partner IPC – Innovative Polymer Compounds. VELOX also offers assistance at design stage, fast delivery of small quantities, regulatory support as well as supply agreements.

Visit VELOX at Booth 1G16 to meet the team and explore the service offer.

Click here to download PDF

VELOX to distribute Anobex™ from MSM Poly

VELOX GmbH (“VELOX”), a European leader in the marketing and distribution of raw material specialities for the plastics, composites, additives and paints and coatings industries, is delighted to announce its distribution agreement with MSM Poly. VELOX is distributing acrylonitrile methyl acrylate copolymer (AMAC) latex resin which production is actively scaling up by MSM Poly at the moment. The company plans to sell under the trade name Anobex™ and is progressing with the delivery and installation of production equipment.

MSM Poly is developing Anobex™ as a replacement for the AMAC resin known as Barex®, which INEOS ceased manufacturing September 22. MSM Poly had been negotiating to acquire the Barex® name and related intellectual property from INEOS, but those discussions ended recently with no agreement. Peter Schmitt comments: “That development, however, has not impeded MSM Poly's efforts to bring Anobex™ to market”.

Customers now are receiving initial pilot lots and report successful equivalence testing. Inde-pendent laboratories also have confirmed that the material is equivalent, using industry standard testing procedures such as FTIR.

Additionally, according to MSM Poly managing member Peter Schmitt, companies already have successfully processed Anobex™ resin into both film and injection moulded parts.
Qualification runs of 1 to 5 tons will begin from February 2017 and will then go to customers for qualification and approval. MSM Poly plans to launch full commercial production of
Anobex™ resin by the fourth quarter next year.

About VELOX
VELOX is a leading European distributor of speciality materials for the plastics industry. The Hamburg-based company is an established distributor of highly innovative raw materials and provides its customers with an expert, personalised service thanks to its experienced Sales staff.

Contact at VELOX
Bernard Goursaud
Managing Director
T: +49 / (0)40 - 369 688-0
F: +49 / (0)40 - 369 688-88
E: goursaud(at)velox.com

Click here to download PDF

VELOX extends its plastics portfolio by VEMAB® PEEK


VELOX is a leading European distributor of speciality materials for the plastics industry. The Hamburg-based company is an established distributor of highly innovative raw materials and provides its customers with an expert, personalised service thanks to its experienced Sales staff.
 
In cooperation with its development laboratory, VELOX is producing compounds based on polyether ether ketone (PEEK) under its own brand name VEMAB® PEEK. The new product range includes various glass and carbon fibre reinforced plastics, tribologically optimised formulas as well as customer-specific solutions for extrusion and injection moulding applications.

Additionally, VELOX is offering unmodified PEEK in three different viscosities in granulate and powder form for compounding, extrusion, compression and injection moulding.

“The aim is to bring a high-quality material at a competitive price to the marketplace providing professional technical service and an efficient supply chain. We believe that due to our flexible production and logistics structures we are able to promptly fulfil the requirements of our customers,” comments Ekaterina Boës, Business Development Manager at VELOX.

VELOX will be present at the K-Show from the 19th to 26th of October 2016 in Dusseldorf in hall 6 at booth A23. Our expert team will be pleased to give you more details about the PEEK product range.

Contact at VELOX
Ekaterina Boës
Business Development Manager
T: +49 / (0)40 - 369 688-0
F: +49 / (0)40 - 369 688-88
E: boes(at)velox.com

Click here to download PDF

VELOX presents its plastics specialities at the K Show 2016

 

VELOX GmbH, a leading European distributor of speciality materials for the plastics industry, will be presenting its current innovative product range at the K Show 2016 from 19 to 26 October in Dusseldorf, Germany, at Booth A23 in Hall 6.
 
The VELOX product range covers a comprehensive spectrum of speciality plastics for technical, packaging and medical applications as well as purging compounds. Alongside these, the company will also be presenting its range of additives for plastics and rubber, functional fillers and flame retardants as well as many other innovative products for the plastics industry.

This year VELOX will be presenting the latest thermoplastic polyurethane (TPU) innovations from its partner Lubrizol Advanced Materials, a leader of the TPU technology. Estane® VSN 9000 is specifically designed to improve the performance of high-end eyewear frames delivering unique and highly desirable properties: self-healing capabilities, excellent dimension stability as well as chemical resistance and is therefore an excellent PA 12 alternative for eyewear frames and other applications.

Polyram Plastic Industries Ltd, a leading global supplier of high performance thermoplastic compounds and long-standing VELOX partner, will present the new tie layer grades Bondyram TL4530 and TL4401. These allow coextrusion of copolyester (PET / PETG) or polystyrene (PS) to adhere to materials such as EVOH, PA and PE resins.

Visitors can discover one more product launch: VEMAB® PEEK. VELOX produces compounds based on polyether ether ketone (PEEK) under its own brand name VEMAB® PEEK in cooperation with its development laboratory. The new product range includes various glass and carbon fibre reinforced plastics, tribologically optimised formulas as well as customer-specific solutions for extrusion and injection moulding applications. Additionally, VELOX will be presenting unmodified PEEK in three different viscosities in granulate and powder form for compounding, extrusion, compression and injection moulding.

VELOX partner ADVANC3D Materials GmbH which specialises in the development, production, sales and distribution of 3D printing materials will be presenting its current 3D printing materials. In particular, filaments made from different polymers distributed by VELOX will be presented at the show. Drop at our booth for a live presentation of a 3D print.

VELOX will also present products by its partner Samyang Engineering Plastics. The company will showcase TRIEL®, a Thermoplastic Polyester Elastomer (TPE-E).

VELOX Managing Director François Minec about the company’s participation at the upcoming K Show: “We are looking forward to presenting our new products to our current and potential customers and discuss future projects. VELOX is proud of being accompanied by many of its highly valued partners who share their expertise at our 240 m² booth during the most important show in the European plastics industry“.

VELOX exhibits at numerous leading specialist trade fairs: visit www.velox.com for a list of events where VELOX participates.

Click here to download PDF - English

VELOX exhibits at Kunststoffen 2016

VELOX GmbH, a leading European distributor of raw material specialities for the plastics industry, will be exhibiting at the 18th edition of Kunststoffen taking place in the NH Conference Centre Koningshof in Veldhoven (Netherlands) from 28 to 29 September 2016.

The VELOX product range covers a comprehensive spectrum of speciality plastics for technical, packaging and medical applications as well as purging compounds. Alongside these, the company will also be presenting its range of additives for plastics and rubber, functional fillers and flame retardants as well as many other innovative products for the plastics industry.

This year VELOX will present its high-performance polymers as well as its additives range which is used in highly specialised applications and everyday products.

Visitors can discover new compatibilisers from Fine-Blend which improve phase stability and heat resistance of polyester and PC alloys and work as a chain extender for recycled PET, PLA and PC.

Another new product from the VELOX product range will be VEMAB® PEEK. VELOX produces compounds based on polyether ether ketone (PEEK) under its own brand name VEMAB® PEEK in cooperation with its development laboratory. The new product range includes various glass and carbon fibre reinforced plastics, tribologically optimised formulas as well as customer-specific solutions for extrusion and injection moulding applications. Additionally, VELOX will present unmodified PEEK in three different viscosities in granulate and powder form for compounding, extrusion, compression and injection moulding.

Find out more about VELOX’ complete product range and meet VELOX’ plastics experts on stand 124.

VELOX Benelux
Meerpaal 14E
4904 SK Oosterhout (NB)
Netherlands
T: +31 (0)162 748 020
F: +31 (0) 162 748 021
E: info.nl(at)velox.com

 

Click here to download PDF - English

Displaying results 31 to 37 out of 37
<< < 1-10 11-20 21-30 31-37 > >>